Ultrasonic Testing Couplant

FLUXO US-1

Ultrasonic Couplant – Powder Form

  • The thixotropic properties of this couplant give excellent wetting and acoustic transmission and do not allow the product to flow all over the test area.

  • FLUXO US-1 is very economical to use as you only cover the working area and not the whole piece.

  • FLUXO US-1 incorporates corrosion inhibitors and wetting agents and is free of VOC’s and other hazardous materials.

  • FLUXO US-1 contain a fluorescent tracer to enable areas to be checked for coverage.

  • Easy removable with water of Solvent.

UT-X Powder

UT-X® Powder is a cost-effective couplant powder for flaw detection and thickness gaging applications where ferrous corrosion inhibition is required

UT-X Powder retains viscosity on salt caked boiler tubes, corroded pipe, structural steel, steel billets, welds and ship plate. Mixed with water at the inspection site, its compact and lightweight packets are easy to transport to a job site or to store as an emergency couplant for unanticipated shortages.

Benefits

  • Salt resistant

  • Environmentally benign formula

  • Fast, lump-free mixing

  • Concentrated to reduce shipping cost and storage space

  • No dyes, fragrance or glycerin

  • Low skin irritation potential

  • Short-term corrosion protection

  • Economical option

Ultragel II

​Industry-leading, high-performance ultrasonic couplant for flaw detection and sizing, thickness gauging, flow metering and acoustic emission testing

Ultragel II is widely recognized as the industry’s most dependable and popular ultrasonic couplant. This general-purpose medium viscosity gel is known for its outstanding performance, excellent corrosion protection, thixotropic properties and comprehensive range of specifications and approvals.

Ultragel II is Pratt & Whitney approved and meets nuclear grade specifications for halogen and sulfur levels.

Benefits

  • Clings well to vertical and overhead surfaces

  • Fills in depressions in rough surfaces

  • Highest corrosion protection

  • Slow drying for longer inspection time

  • Provides good transducer lubrication

  • Increased acoustic impedance reduces surface noise

  • Wide range of specifications and approvals

  • Thixotropic gel

  • Great surface wetting

  • Nuclear grade

  • Aerospace approvals

  • Hydrogen embrittlement testing

Soundsafe

High-performance, general-purpose ultrasonic couplant for flaw detection and sizing, thickness gauging, flow metering and acoustic emission testing

This medium viscosity gel couplant is well known for its outstanding performance, excellent corrosion protection, thixotropic properties and comprehensive range of specifications and approvals.

Soundsafe is Pratt & Whitney approved and meets nuclear grade specifications for halogen and sulfur levels.

Benefits

  • Clings well to vertical and overhead surfaces

  • Fills in depressions in rough surfaces

  • Highest corrosion protection

  • Slow drying for longer inspection time

  • Provides good transducer lubrication

  • Increased acoustic impedance reduces surface noise

  • Wide range of specifications and approvals

  • Thixotropic gel

  • Great surface wetting

  • Nuclear grade

  • Aerospace approvals

  • Hydrogen embrittlement testing

Economical Ultrasonic Couplant

Echogel® is an economical, basic-use couplant for ultrasonic inspections

Echogel® is an economical, basic-use couplant for ultrasonic inspections, like flaw detection/sizing and thickness gauging, where salt cake or metal corrosion salts are present. It provides good corrosion inhibition and resists viscosity breakdown on salt-caked boilers and other corroded materials.

Echogel comes in two different viscosities, Echogel 14 which is a thin, flowable gel and Echogel 20 which is a medium-thick gel

Benefits

  • Enhanced surface wetting to quickly cover oily or dirty surfaces

  • Maintains viscosity on corrosion or salt cake

  • Good corrosion inhibition

  • Silicone free

  • Hydrogen embrittlement testing

OTHER AVAILABILE OPTIONS

HIGH TEMP - SPECIALTY - GENERAL

OPTIONS

Soundclear- High-value, general-purpose, medium-thick gel ultrasonic couplant for flaw detection, flaw sizing and thickness gauging applications

Sonoglide FE - Very high-performance couplant with extra corrosion protection for ferrous, operating temperature range is -60 to 250°F / -51 to 121°C

Sonoglide UP- Ultra-pure, very high-performance couplant is compatible with titanium, aluminum, copper, stainless steel, plastics, magnesium alloys and most composites

Sono 600- Multi-purpose couplant with a wide temperature range for flaw detection, thickness gauging and acoustic emission testing from 0 to 700°F / -18 to 371°C

Sono 900 High-temperature couplant for thickness gauging applications ranging from 600 to 780°F / 316 to 404°C

Pyrogel -A wide temperature range couplant for thickness gauging, flow metering, acoustic emissions testing and flaw detection/sizing at -50 to 805°F / -45 to 429°C

..... AND MORE 

Contact us for more information 

Please reload