The HPX family of products has earned many of the NDT industry’s most prestigious awards. The new HPX-1 Plus CR system builds on this solid foundation, and raises the bar even higher, to make NDT radiography easier, more productive, more accurate, and more affordable.

Introducing the


Digital CR System


Plate size flexibility

  • HPX-1 Plus can handle a wide range of plate sizes up to 60" long, ranging from 70 mm – 14-inch wide

Wide dynamic range

  • Provides wide dynamic imaging range in a single shot

  • Reduces many multi-film shots to a single CR exposure

Subdued or room light capabilities

  • HPX-1 can work in an environment with subdued lighting (does not need to be dark)

  • Light cover masks out most outside light during scan

  • Can run bare imaging plates or with a rigid cassettes (this can be used in normal room light)

Halogen “Smart” erase

  • Improved SmartErase system applies calculated light intensity erase based upon exposure received

  • HPX-1 Plus improved throughput from optimized erase system

Superior image viewing tools

  • Image viewing tools allow displayed images to be enhanced digitally to aid in interpretation without altering the Original Image Data

  • Customizable multilayered image display filter

Specifically built for NDT applications:

  • Multiple fans and filters maintain positive internal air pressure to keep dust, debris  unfiltered air out of the system

  • Integrated brushes and seals keep environmental light and dirt out

  • Rubber feet absorb ambient vibrations in the field

  • Ergonomically designed handles for easy transport

  • Dust cover for extra storage protection in industrial environments

  • Withstood rigorous drop testing (100 g impact force)

  • Withstood variable amplitude and frequency vibration test

System Benefits 

Ultra High Image Quality

Spatial Resolution
25μ, 35μ, 50μ and 100μ operation Pixel Pitch: 50 Microns or better (12 lp/mm) Laser Spot Size: 20μ (measured at 85% of peak)

Positive Pressure Fans for Dirty NDT Environments 

Let’s face it, NDT environments can be dirty. Drum and flat bed style scanners collect contaminants on the surface where they can be transported into the system or into the optical path and be be imaged. HPX-1 Plus is the only CR system on the market that has positive airflow to keep contaminants outside the unit.

Dual Air Filters (including HEPA) 
Clean air is critical to keeping the equipment cool and the imaging areas clean. The HPX- 1 Plus is the only system outfitted with dual filters to make sure the environment is kept outside.

Image Plate Flexibility 

HPX systems are one of the most flexible CR systems on the market capable of handling raw imaging plates, multiple plates at one time, custom cut sizes (with Plate Carrier), hard cassettes and long Plates (up to 60”) without special feed guides.

Plate Transport System 

The HPX-1 Plus plate transport system has always minimized contact with the imaging plate. Unlike magnetic plate drive systems that require uniquely designed imaging plates (which can be costly) or drum systems that advise using plate protective covers to avoid plate damage, the HPX-1 Plus run plates phosphor side up with a proven transport system that won’t damage your imaging plates.

Improved Optics 

HPX-1 Plus’ improved PMT’s improve its sensitivity and reduce unwanted artifacts. CR systems often also make it possible to lower your exposure while still achieving the required sensitivity. Our adjustable PMT and Laser Power allow you fine tune every image for optimum capture every time.

Powerful Software 

HPX-1 Plus is operated using our powerful INDUSTREX software that includes a host of features for measurement, custom designed EDGE Image Filters, full DICONDE compliance, and many other tools designed specifically for NDT.

Workflow Improvements 

Easy to Install

The HPX-1 Plus site install & easy workflow. Customer installable and simple to operate. Only two connections to make and you can start working.

Rapid Job Setup

Flexible to operate in a windows or DICONDE mode, Our INDUSTREX software can be set to operate in a Windows based format or in full DICONDE mode. Use whichever best fits your workflow and customer requirements.

Shot Time Improvement

Shoot faster, radiate less and keep your source longer. In certain circumstances, it’s possible for HPX-1 Plus to reduce exposure time.

Process, Analyse & Approve

High resolution. High throughput. HPX-1 Plus can process imaging plates up to 60-inches and has a new halogen erase system for faster throughput. Preset the system so images appear with the desired filters already applied and approve in one click.

Customized reporting
The HPX- 1 Plus can make customized multi-line or single shot-style reports in seconds. Create a work report by simply selecting the welds to be included and click “create report”. Make a custom-made multi-line or single weld-style report in seconds with pre-selected data.

Performance Accessories

  • Use GP, HR and XL Blue imaging plates

  • Small plate carrier

  • Rapid diagnostic tool to check system status

  • Job setup module (DICONDE)

  • DR panel interface

  • Archiving 

Request a Quote