FLUXO 3

Concentrate of black magnetic particles in petroleum carrier fluid

FLUXO 3:

Very finely divided black magnetic particles suspended in high flash point odourless kerosene designed to provide good particle mobility.


Use : This Magnetic particle examination is used for the detection of emerging defects in all ferromagnetic materials. Applicability: Aeronautics, Automobile, Railway, etc...


Components are magnetised and FLUXO 3 is applied to the test area, normally by spraying immediately prior to and during magnetisation. Application of FLUXO 3 should cease before the magnetisation is switched off. Defects will show up as well defined black indications and inspection should take place in good white light of at least 500 lux.


It is not practical to use FLUXO 3 on dark coloured substrates as it would be difficult for the inspector to identify indications against the dark background. For this reason,

FLUXO 7 is frequently used to provide a contrasting white background against the black indications thereby enabling the inspector see and interpret indications more easily. (Alternatively, fluorescent fluids such as FLUXO 6 may be used, but this requires the availability of a UV Light)